VBoxManage dhcpserver

DHCP server management.

Synopsis

VBoxManage dhcpserver add < --network=netname | --interface=ifname > <--server-ip=address> <--netmask=mask> <--lower-ip=address> <--upper-ip=address> < --enable | --disable >
[[--global] [--set-opt=dhcp-opt-no value...] [--set-opt-hex=dhcp-opt-no hexstring...] [--force-opt=dhcp-opt-no...] [--supress-opt=dhcp-opt-no...] [--min-lease-time=seconds] [--default-lease-time=seconds] [--max-lease-time=seconds]...]
[<--group=name> [--set-opt=dhcp-opt-no value...] [--set-opt-hex=dhcp-opt-no hexstring...] [--force-opt=dhcp-opt-no...] [--supress-opt=dhcp-opt-no...] [--incl-mac=address...] [--excl-mac=address...] [--incl-mac-wild=pattern...] [--excl-mac-wild=pattern...] [--incl-vendor=string...] [--excl-vendor=string...] [--incl-vendor-wild=pattern...] [--excl-vendor-wild=pattern...] [--incl-user=string...] [--excl-user=string...] [--incl-user-wild=pattern...] [--excl-user-wild=pattern...] [--min-lease-time=seconds] [--default-lease-time=seconds] [--max-lease-time=seconds]...]
[<--vm=name|uuid> [--nic=1-N] [--set-opt=dhcp-opt-no value...] [--set-opt-hex=dhcp-opt-no hexstring...] [--force-opt=dhcp-opt-no...] [--supress-opt=dhcp-opt-no...] [--min-lease-time=seconds] [--default-lease-time=seconds] [--max-lease-time=seconds] [--fixed-address=address]...]
[<--mac-address=address> [--set-opt=dhcp-opt-no value...] [--set-opt-hex=dhcp-opt-no hexstring...] [--force-opt=dhcp-opt-no...] [--supress-opt=dhcp-opt-no...] [--min-lease-time=seconds] [--default-lease-time=seconds] [--max-lease-time=seconds] [--fixed-address=address]...]

VBoxManage dhcpserver modify < --network=netname | --interface=ifname > [--server-ip=address] [--lower-ip=address] [--upper-ip=address] [--netmask=mask] [ --enable | --disable ]
[[--global] [--del-opt=dhcp-opt-no...] [--set-opt=dhcp-opt-no value...] [--set-opt-hex=dhcp-opt-no hexstring...] [--force-opt=dhcp-opt-no...] [--unforce-opt=dhcp-opt-no...] [--supress-opt=dhcp-opt-no...] [--unsupress-opt=dhcp-opt-no...] [--min-lease-time=seconds] [--default-lease-time=seconds] [--max-lease-time=seconds] [--remove-config]...]
[<--group=name> [--set-opt=dhcp-opt-no value...] [--set-opt-hex=dhcp-opt-no hexstring...] [--force-opt=dhcp-opt-no...] [--unforce-opt=dhcp-opt-no...] [--supress-opt=dhcp-opt-no...] [--unsupress-opt=dhcp-opt-no...] [--del-mac=address...] [--incl-mac=address...] [--excl-mac=address...] [--del-mac-wild=pattern...] [--incl-mac-wild=pattern...] [--excl-mac-wild=pattern...] [--del-vendor=string...] [--incl-vendor=string...] [--excl-vendor=string...] [--del-vendor-wild=pattern...] [--incl-vendor-wild=pattern...] [--excl-vendor-wild=pattern...] [--del-user=string...] [--incl-user=string...] [--excl-user=string...] [--del-user-wild=pattern...] [--incl-user-wild=pattern...] [--excl-user-wild=pattern...] [--zap-conditions] [--min-lease-time=seconds] [--default-lease-time=seconds] [--max-lease-time=seconds] [--remove-config]...]
[<--vm=name|uuid> [--nic=1-N] [--del-opt=dhcp-opt-no...] [--set-opt=dhcp-opt-no value...] [--set-opt-hex=dhcp-opt-no hexstring...] [--force-opt=dhcp-opt-no...] [--unforce-opt=dhcp-opt-no...] [--supress-opt=dhcp-opt-no...] [--unsupress-opt=dhcp-opt-no...] [--min-lease-time=seconds] [--default-lease-time=seconds] [--max-lease-time=seconds] [--fixed-address=address] [--remove-config]...]
[<--mac-address=address> [--del-opt=dhcp-opt-no...] [--set-opt=dhcp-opt-no value...] [--set-opt-hex=dhcp-opt-no hexstring...] [--force-opt=dhcp-opt-no...] [--unforce-opt=dhcp-opt-no...] [--supress-opt=dhcp-opt-no...] [--unsupress-opt=dhcp-opt-no...] [--min-lease-time=seconds] [--default-lease-time=seconds] [--max-lease-time=seconds] [--fixed-address=address] [--remove-config]...]

VBoxManage dhcpserver remove < --network=netname | --interface=ifname >

VBoxManage dhcpserver restart < --network=netname | --interface=ifname >

VBoxManage dhcpserver findlease < --network=netname | --interface=ifname > <--mac-address=mac>

Description

The dhcpserver commands enable you to control the DHCP server that is built into VirtualBox. You may find this useful when using internal or host-only networking. Theoretically, you can also enable it for a bridged network, but that may cause conflicts with other DHCP servers in your physical network.

Common options

The subcommands of dhcpserver all operate on an internal network that can be identified via its name or in the host-only case via the host-only interface name:

--network=netname: The internal network name. This is the same as you would use as value to the VBoxManage modifyvm --intnet option when configuring a VM for internal networking. Or you see as VBoxNetworkName in the output from VBoxManage list intnets, VBoxManage list natnets, or VBoxManage list hostonlyifs.
--interface=ifname: The host only interface name. This would be same value as you would use for the VBoxManage modifyvm --hostonlyadapter option when configuring a VM to use a host-only network. The value can also be found in the Name row in VBoxManage list hostonlyifs.

dhcpserver add

Adds a new DHCP server to a network or host-only interface.

Options configuring the DHCP server core:

--server-ip=address: The IP address the DHCP server should use.
--lower-ip=address, --upper-ip=address: The IP address range for the DHCP server to manage. This should not include the address of the DHCP server itself, but it must be in the same network as it. The boundraries are inclusive, so both the lower and upper addresses will be handed out to clients.
--netmask=mask: The network mask. Typically 255.255.255.0.
--enable, --disable: Whether to enable the DHCP server or disable it. If not specified, the server will be created in disabled state and no IP addresses handed out.

Options selecting the scope:

--global: Set the configuration scope to global. Any subsequent --set-opt options will be apply to all the DHCP clients.
--vm=vmname|uuid: Set the configuration scope to the first NIC of the specified VM. Any subsequent --set-opt options will apply just to that interface, nothing else.
--nic=1-N: Set the configuration scope to a NIC other than first of the VM specified the in --vm.
--mac-address=address: Set the configuration scope to the specified MAC address.
--group=name: Set the configuration scope to the specified group.

Options configuring the currently selected scope:

--set-opt=dhcp-opt-no value: Adds the specified DHCP option number (0-255) and value. The value format is option specific (typically human readable) and will be validated by the API and the DHCP server.
--set-opt-hex=dhcp-opt-no hexstring: Adds the specified DHCP option number (0-255) and value. The option value is specified as a raw series of hex bytes, optionally separated by colons. No validation is performed on these by the API or the DHCP server, they will be pass as specified to the client.
--force-opt=dhcp-opt-no: Forces the specified DHCP option number (0-255) onto to be sent to the client whether it requested it or not (provided the option is configured with a value at some level).
--suppress-opt=dhcp-opt-no: Prevents the specified DHCP option number (0-255) from being sent to the client when present in this or a high configuration scope.
--min-lease-time=seconds: Sets the minimum lease time for the current scope in seconds. Zero means taking the value from a higher option level or use default.
--default-lease-time=seconds: Sets the default lease time for the current scope in seconds. Zero means taking the value from a higher option level or use default.
--max-lease-time=seconds: Sets the maximum lease time for the current scope in seconds. Zero means taking the value from a higher option level or use default.
--fixed-address=address: Fixed address assignment for a --vm or --mac-address configuration scope. Any empty address turns it back to dynamic address assignment.

Options configuring group membership conditions (excludes overrides includes):

--incl-mac=address: Include the specific MAC address in the group.
--excl-mac=address: Exclude the specific MAC address from the group.
--incl-mac-wild=pattern: Include the specific MAC address pattern in the group.
--excl-mac-wild=pattern: Exclude the specific MAC address pattern from the group.
--incl-vendor=string: Include the specific vendor class ID in the group.
--excl-vendor=string: Exclude the specific vendor class ID from the group.
--incl-vendor-wild=pattern: Include the specific vendor class ID pattern in the group.
--excl-vendor-wild=pattern: Exclude the specific vendor class ID pattern from the group.
--incl-user=string: Include the specific user class ID in the group.
--excl-user=string: Exclude the specific user class ID from the group.
--incl-user-wild=pattern: Include the specific user class ID pattern in the group.
--excl-user-wild=pattern: Exclude the specific user class ID pattern from the group.

dhcpserver modify

This modifies an existing DHCP server configuration. It takes the same options as the add command with the addition of the following on scope configuration:

--del-opt=dhcp-opt-no: Counterpart to --set-opt that will cause the specified DHCP option number (0-255) to be deleted from the server settings. Like with --set-opt the scope of the deletion is governed by the --global, --vm, --mac-address and --group options.
--unforce-opt=dhcp-opt-no: Removes the specified DHCP option number (0-255) from the forced option list (i.e. the reverse of --force-opt). Like with --set-opt the scope of the deletion is governed by the --global, --vm, --mac-address and --group options.
--unsuppress-opt=dhcp-opt-no: Removes the specified DHCP option number (0-255) from the supressed option list (i.e. the reverse of --suppress-opt). Like with --set-opt the scope of the deletion is governed by the --global, --vm, --mac-address and --group options.
--remove-config: Removes the configuration currently being scoped. The --global scope is not removable. The configuration scope will change to --global after this option.

And the addition of these group membership condition options:

--del-mac=address: Delete the specific MAC address from the group conditions.
--del-mac-wild=pattern: Delete the specific MAC address pattern from the group conditions.
--del-vendor=string: Delete the specific vendor class ID from the group conditions.
--del-vendor-wild=pattern: Delete the specific vendor class ID pattern from the group conditions.
--del-user=string: Delete the specific user class ID pattern from the group conditions.
--del-user-wild=pattern: Delete the specific user class ID pattern from the group conditions.
--zap-conditions: Deletes all the group conditions.

dhcpserver remove

VBoxManage dhcpserver remove < --network=netname | --interface=ifname >

Removes the specified DHCP server.

dhcpserver restart

VBoxManage dhcpserver restart < --network=netname | --interface=ifname >

Restarts the specified DHCP server. The DHCP server must be running.

dhcpserver findlease

VBoxManage dhcpserver findlease < --network=netname | --interface=ifname > <--mac-address=mac>

Performs a lease database lookup. This is mainly for getting the IP address of a running VM.

--mac-address=mac: The MAC address to lookup in the lease database.

Common DHCP Options:

1 - SubnetMask: IPv4 netmask. Set to the value of the --netmask option by default.
2 - TimeOffset: UTC offset in seconds (32-bit decimal value).
3 - Routers: Space separated list of IPv4 router addresses.
4 - TimeServers: Space separated list of IPv4 time server (RFC 868) addresses.
5 - NameServers: Space separated list of IPv4 name server (IEN 116) addresses.
6 - DomainNameServers: Space separated list of IPv4 DNS addresses.
7 - LogServers: Space separated list of IPv4 log server addresses.
8 - CookieServers: Space separated list of IPv4 cookie server (RFC 865) addresses.
9 - LPRServers: Space separated list of IPv4 line printer server (RFC 1179) addresses.
10 - ImpressServers: Space separated list of IPv4 imagen impress server addresses.
11 - ResourseLocationServers: Space separated list of IPv4 resource location (RFC 887) addresses.
12 - HostName: The client name. See RFC 1035 for character limits.
13 - BootFileSize: Number of 512 byte blocks making up the boot file (16-bit decimal value).
14 - MeritDumpFile: Client core file.
15 - DomainName: Domain name for the client.
16 - SwapServer: IPv4 address of the swap server that the client should use.
17 - RootPath: The path to the root disk the client should use.
18 - ExtensionPath: Path to a file containing additional DHCP options (RFC2123).
19 - IPForwarding: Whether IP forwarding should be enabled by the client (boolean).
20 - OptNonLocalSourceRouting: Whether non-local datagrams should be forwarded by the client (boolean)
21 - PolicyFilter: List of IPv4 addresses and masks paris controlling non-local source routing.
22 - MaxDgramReassemblySize: The maximum datagram size the client should reassemble (16-bit decimal value).
23 - DefaultIPTTL: The default time-to-leave on outgoing (IP) datagrams (8-bit decimal value).
24 - PathMTUAgingTimeout: RFC1191 path MTU discovery timeout value in seconds (32-bit decimal value).
25 - PathMTUPlateauTable: RFC1191 path MTU discovery size table, sorted in ascending order (list of 16-bit decimal values).
26 - InterfaceMTU: The MTU size for the interface (16-bit decimal value).
27 - AllSubnetsAreLocal: Indicates whether the MTU size is the same for all subnets (boolean).
28 - BroadcastAddress: Broadcast address (RFC1122) for the client to use (IPv4 address).
29 - PerformMaskDiscovery: Whether to perform subnet mask discovery via ICMP (boolean).
30 - MaskSupplier: Whether to respond to subnet mask requests via ICMP (boolean).
31 - PerformRouterDiscovery: Whether to perform router discovery (RFC1256) (boolean).
32 - RouterSolicitationAddress: Where to send router solicitation requests (RFC1256) (IPv4 address).
33 - StaticRoute: List of network and router address pairs addresses.
34 - TrailerEncapsulation: Whether to negotiate the use of trailers for ARP (RTF893) (boolean).
35 - ARPCacheTimeout: The timeout in seconds for ARP cache entries (32-bit decimal value).
36 - EthernetEncapsulation: Whether to use IEEE 802.3 (RTF1042) rather than of v2 (RFC894) ethernet encapsulation (boolean).
37 - TCPDefaultTTL: Default time-to-live for TCP sends (non-zero 8-bit decimal value).
38 - TCPKeepaliveInterval: The interface in seconds between TCP keepalive messages (32-bit decimal value).
39 - TCPKeepaliveGarbage: Whether to include a byte of garbage in TCP keepalive messages for backward compatibility (boolean).
40 - NISDomain: The NIS (Sun Network Information Services) domain name (string).
41 - NISServers: Space separated list of IPv4 NIS server addresses.
42 - NTPServers: Space separated list of IPv4 NTP (RFC1035) server addresses.
43 - VendorSpecificInfo: Vendor specific information. Only accessible using --set-opt-hex.
44 - NetBIOSNameServers: Space separated list of IPv4 NetBIOS name server (NBNS) addresses (RFC1001,RFC1002).
45 - NetBIOSDatagramServers: Space separated list of IPv4 NetBIOS datagram distribution server (NBDD) addresses (RFC1001,RFC1002).
46 - NetBIOSNodeType: NetBIOS node type (RFC1001,RFC1002): 1=B-node, 2=P-node, 4=M-node, and 8=H-node (8-bit decimal value).
47 - NetBIOSScope: NetBIOS scope (RFC1001,RFC1002). Only accessible using --set-opt-hex.
48 - XWindowsFontServers: Space separated list of IPv4 X windows font server addresses.
49 - XWindowsDisplayManager: Space separated list of IPv4 X windows display manager addresses.
62 - NetWareIPDomainName: Netware IP domain name (RFC2242) (string).
63 - NetWareIPInformation: Netware IP information (RFC2242). Only accessible using --set-opt-hex.
64 - NISPlusDomain: The NIS+ domain name (string).
65 - NISPlusServers: Space separated list of IPv4 NIS+ server addresses.
66 - TFTPServerName: TFTP server name (string).
67 - BootfileName: Bootfile name (string).
68 - MobileIPHomeAgents: Space separated list of IPv4 mobile IP agent addresses.
69 - SMTPServers: Space separated list of IPv4 simple mail transport protocol (SMPT) server addresses.
70 - POP3Servers: Space separated list of IPv4 post office protocol 3 (POP3) server addresses.
71 - NNTPServers: Space separated list of IPv4 network news transport protocol (NTTP) server addresses.
72 - WWWServers: Space separated list of default IPv4 world wide web (WWW) server addresses.
73 - FingerServers: Space separated list of default IPv4 finger server addresses.
74 - IRCServers: Space separated list of default IPv4 internet relay chat (IRC) server addresses.
75 - StreetTalkServers: Space separated list of IPv4 StreetTalk server addresses.
76 - STDAServers: Space separated list of IPv4 StreetTalk directory assistance (STDA) server addresses.
78 - SLPDirectoryAgent: Addresses of one or more service location protocol (SLP) directory agent, and an indicator of whether their use is mandatory. Only accessible using --set-opt-hex.
79 - SLPServiceScope: List of service scopes for the service location protocol (SLP) and whether using the list is mandator. Only accessible using --set-opt-hex.
119 - DomainSearch: Domain search list, see RFC3397 and section 4.1.4 in RFC1035 for encoding. Only accessible using --set-opt-hex.