Capacitive Proximity Switch LJC18A3-H-Z/BX - Silver and Yellow
$7.97
Electrical & Tools
Description: Not all materials are subject to 10MM detection range Limitations:
Three factors that affect sensor function:
1 material density. Most plastic materials cannot be detected by capacitive proximity sensors at appropriate distances. Sometimes due to low density, sometimes the plastic is too thin. For example, if you detect an empty 1mm thick plastic bottle, the detection distance may be less than 2mm. If the bottle is filled with water, the detection distance may exceed 5mm.
2. Sensitivity when the sensor When it is not working, there is a sensitivity adjustment screw on the back of the sensor. You can use a flat screwdriver to rotate clockwise to increase the sensitivity of the sensor.
3. Load current. High output current may cause product failure, inductive load (for example, high current absorption at startup) The motor is not allowed to be connected directly to the sensor, because the sensor can only supply 300mA to the load. You can use the sensor to provide a low level signal for a PLC that requires very little current, or you can control a small size that requires less than 100mA of coil current. Relay.
| General | |
|---|---|
| Model | Capacitive proximity switch LJC18A3-H-Z/BX |
| Quantity | 1 piece |
| Material | plastic+metal |
| Specification | |
| Power Range | DC 6-36V |
| Max. Current | 300MA |
| Working Temperature | -25°C+ 65°C℃ |
| Packing List | |
|---|---|
| 1 X Capacitive Proximity Switch | |
Package Weight:0.082kg (0.181lb)
Package Size:13cm x 7.5cm x 2cm (5.12in x 2.76in x 0.79in)