1.2A Mini Dual Motor Driver Module Full-bridge Driver for Arduino
$2.39
Electrical & Tools
The motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak) . Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.
Note: However, when using the board at currents up to 0.6A, it may be necessary to improve thermal performance with a heat-sink.
Features:
- Driver Chip: TB6612FNG
- Power supply voltage: VM=15V max, VCC=2.7-5.5V
- Output current: Iout=1.2A (average) / 3.2A (peak)
- Standby control to save power
- CW/CCW/short brake/stop motor control modes
- Built-in thermal shutdown circuit and low voltage detecting circuit
- All pins of the TB6612FNG broken out to 2.54mm spaced pins, and it can be plugged onto the breadboard.
- Filtering capacitors on both supply lines
- Great for DIY and smart car projects
| General | |
|---|---|
| Model | N/A |
| Quantity | 1 piece |
| Material | PCB+Alloy+Plastic |
| Specification | |
| Input Voltage | 2.7-5.5V |
| Working Current | 1.2A |
| English Manual / Spec | Yes |
| Download Link | http://pan.baidu.com/s/1c0DMUbe |
| Packing List | |
|---|---|
| 1 x Mini Motor Driver module | |
Package Weight:0.003kg (0.007lb)
Package Size:6cm x 3cm x 2.5cm (2.36in x 1.18in x 0.79in)